Morrison Knudsen MK5000C |
 |
| Data Sheet Information Compiled by: Jean-Denis Bachand |
| Revised: 28 September 2009 |
Artwork (2) on this page by: Jean-Denis Bachand |
| - |
| Engine Builder: CAT |
Engine: 3512 |
| Cycle: 4 |
Bore & Stroke: 170 mm x 190 mm |
| RPM Max/Min: |
1800 / 450 |
| Type: V16 |
Total Horsepower: 5000 |
| Main Generator: Kato |
Model: TA16SL |
| Gear Ratio: 57:20 |
Speed: 103 mph |
| Trucks: ZWT 6-Wheel |
Configuration: C-C |
| Traction Motor Blowers: 4 |
Model: Delco Elec. Drive |
| Weight: 420,000 lbs |
Traction Motors: MK 1000 (4) |
| Tractive Effort (starting) 85,000 lbs @ 25% |
Tractive Effort (continuous): 55,000 lbs @ 9.3 mph |
| Multiple Unit Capability: Yes |
Dynamic Braking: Yes |
| Auxilary Generator: MK D-18 |
Alternator: Kato 1 |
| Air Compressor: Elec Dr. |
Model: WLN |
| Air Brake: Westinghouse |
Model: 26L |
| Quantity Built: 3
|
Dates: 3/1994 to 6/1994 |
| - |
- |
| Exterior Dimensions
| MK5000C |
| Total Length |
73'-03" |
| Wheel Diameter |
40" |
| Truck Wheel Base |
11'-02" |
| Height to Top Hood |
15'-07.5" |
| Height to Top Cab |
15'-07.5" |
| Cab Width |
10'-03" |
| Hood Width |
10'-00" |
| Height Walkway |
9'-04.5" |
| Walkway |
5'-01" |
| Center Bolster |
46'-07" |
| Center Front Truck to Front Pilot |
2'-03" |
| Center Rear Truck to Rear Pilot |
2'-03" |
| Distance between Truck Centers |
57'-09" |
| Minimum Turning Radious |
42 degrees |
| -
| - |
| Fuel Oil: 2500 gal.
| Lubricating Oil: 1000 gal. |
| Engine Cooling Water: 90 gal.
| Sand Capacity: 52 cu. ft. |
Options: -
- ZWT Trucks produced by Dofaco (on MLW Design)
|
 |
- Diesel Locomotives by Greg McDonnell
|